Set Up Your FireAvert PRO Text Alerts
What is the MerryIoT Lora Gateway and How Does It Work?
The MerryIoT Lora Gateway connects your FireAvert PRO device to your home internet, so you can receive instant text alerts if your stove is left on too long or there’s a safety concern. It acts as a bridge, making sure your FireAvert can notify you wherever you are. Follow along with the following video to get set up:
Written Installation Steps
Just follow these six easy steps to get your Gateway installed!
Step 1: Find and Save Your Gateway Password
- Locate the sticker or label on the back of your Gateway device.
- Take a photo of the label, or carefully write down the password printed on it.
- Keep this password handy, you’ll need it soon.
Step 2: Plug in the Gateway (and Connect Ethernet if Available)
- Remove the power cord, power supply, and Ethernet cable from the box.
- Plug the power cord into the Gateway and then into a wall outlet.
- If your home WiFi router has an Ethernet port, connect the Gateway to your router with the Ethernet cable.
Step 3: Connect to the Gateway’s WiFi
- On your phone, tablet, or computer, go to WiFi settings and disconnect from your home network.
- Find the WiFi network called MerryIoT_Hub-xxxx.
- Connect using the password you saved earlier.
- If prompted to “Use Cellular Data,” tap “Keep Trying WiFi.”
Step 4: Open Gateway Settings in Your Browser
- Open an internet browser.
- At the top in the address bar, type: 192.168.4.1 and press Enter.
- If prompted, enter your Gateway password.
Step 5: Complete Network Setup
- Find “STEP 3: SET WAN” at the bottom of the page.
- Click Dual WAN.
- Choose Ethernet First (if plugged in via Ethernet) or WiFi First (if not).
- Click Next. If you see “Success!”, continue.
- Next screen: Choose DHCP under “Ethernet Setting” and click Next.
- Final screen: Select your home WiFi network, enter its password, and click Next.
Step 6: Confirm Connection and Finish
- Look at the front of the Gateway. If 3 out of 4 blue lights are glowing, you’re connected!
- If any lights are blinking blue, wait a few moments as it’s still connecting.
- You’re done! Now follow the Auto Stove Shutoff user guide.
If you run into issues, give us a call and we’ll help you out! 1-800-677-9870